Using method of software – RGBLink MVP 320 User Manual User Manual
Page 34
MVP 320 User Manual 34
1. Double click the following icon on the Desktop:
2. Log in interface will be entered after opening, the user’s name is ADMIN, and there’s no
pass word, thus your can enter into the software by clicking ―confirm‖.
3. Enter into the main interface of the software as follows, which is divided into two
modules, the menu column is individually the ―processor‖ and ―Main function area‖.
4. First, choose the ―Communication Set‖ under the ―Main function area‖.
5. Open ―Communication Set‖, if you choose NET for connection, please click ―Choose
NET for connection‖, the default IP address of the equipment is 192.168.1.65, port
number is 1024. If you choose Serial ports for connection, please choose the right COM
port, the default Baud rate is 9600. Click ―Confirm‖ after choosing.