RGBLink MVP 320 User Manual User Manual

Page 35

Advertising
background image

MVP 320 User Manual 35

6. Af

ter setting hardware connection, click ―Connect processor‖ on software as follows.

7. Output setting: Splicing setting is divided into four groups, which can separately set

output resolutions and screen combination types; the default screen interval is 0. For

example, the splicing of the following figure is set at 1, the output resolution is 1920X1080,

and combination type is 3X4.

Note: After setting the combination type and resolution, the following operation should be

carried out:

Advertising
See also other documents in the category RGBLink Equipment: