Mindelay – RGBLink VSP 628PRO Quick Start User Manual
Page 12

Address:S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
11
Push the [MENU] button to enter to the menu items, turn the knob to choose output format in <Output
Format>, set the output formats as 2048x1152@60hz, the resolutions of the two outputs will change at
the same time.
(5) Set the split parameters
After choose the split mode, the OLED screen will show the split parameters, set the H total as 3864,
set the V total as 1152, set the first width as 1824, then turn the knob, and choose <Set Parameter>,
push the knob to confirm.
(6) Save
Push the [MENU] button to enter to the menu items, turn the knob and choose <Views>, push the knob
to confirm. Turn the knob again and choose <Save>, push the knob to confirm.
5. MinDelay
In this mode, user can achieve the same input and output resolutions, and achieve the least processor
delay time. Except effects function, it can not support scale, De interlacing, etc.
->H Total 3864
V Total 1152
First Width 1824
Set Parameter >>