RGBLink VSP 628PRO User Manual - Manual (Page 31)

2. Hardware Orientation
VSP 628PRO Back Panel
VSP 628PRO User Manual 31
Sending Card Interface: Support Linsn TS 802, Colorlight IT7e, NOVA
MSD300, etc. The power has been already supplied by video processor
itself, no external power supply needed for sending card.
For more details about the input/output numbers, supported resolutions,
signal level, format standard, etc, please refer to Specification part.
Interface Protection Block
We equip the interface protection blocks on both sides of the back panel,
the purpose are as follows:
1. Protect the interfaces, it avoids the interface damage that may caused if
the back panel hits the ground.
2. Tie the input and output cables, to avoid the cables loose by the external
touch, which may cause signal interrupt. The tie method shown as
follows: