RGBLink CP 3072 User Manual - Manual (Page 49)

5. System Setup and Operation
How to Edit the Channel Signal
CP 3072 User Manual 49
How to Edit the Channel Signal
1. Push any button of 1~4 in B-BUS/PST bar in Input Sources Edit Area,
the button light flashes, which means the button can be edited. For
example, push button 2:
2. Push any signal button in Input Sources Edit Area, For example, push
[VGA] button, then the signal of channel 2 will be switched to VGA.
B-BUS INPUT : INPUT 2
INPUT SOURCE: HDMI
RESOLUTION : NO INPUT
B-BUS INPUT : INPUT 2
INPUT SOURCE: VGA
RESOLUTION : NO INPUT