Daewoo DP-HG22 - Manual (Page 13)

PLASMA DISPLAY HANGER UNIT
12
H W
A A
N L
G L
E
R
U
N
I
T
4. ADJUSTING ANGLES AFTER INSTALLATION (10˚, 15˚, 20˚)
HOW TO ADJUST VIEWING ANGLES
THE FIGURES BELOW DISPLAY THE POSSIBLE PLASMA DISPLAY ANGLES.
.
Take out the screws from the upper part of the frame.
.
Insert the upper part of the frame set B angle adjustment lever
to its gap.
1
2
Lever (X)
0 ˚ 1 0 ˚ 1 5 ˚ 2 0 ˚
.
As pictured below, pull and
adjust the lever (X) to fit your
desired viewing angle.
.
This adjustment needs to be done when the plasma display is tightly secured. Otherwise, the unit
can fall and break.
.
Please retain the two screws for future angle adjustments.
.
At least two people are needed when modifying angle adjustment.
Note