Daewoo DP-HG22 - Manual (Page 7)

PLASMA DISPLAY HANGER UNIT
6
H W
A A
N L
G L
E
R
U
N
I
T
3. ASSEMBLING INSTRUCTIONS
PREPARATION
WHEN THE PLASMA DISPLAY IS ATTACHED TO THE STAND
TO DETACH THE STAND FROM THE PLASMA DISPLAY
TO PLACE THE PROTECTIVE CAPS
.
To avoid unwanted marks on the unit, place
a protective covering over the surface you
will be working on and lay the plasma
display as shown below.
.
Unscrew the secured 2 screws completely
and Pull the stand away from the plasma
display to detach.
.
There will be two holes where the stand
has been detached.
.
Put the protective caps on the holes and
use the screws to secure tightly.
1
2
Screws
Caps
Holes