Daewoo DP-HG22 - Manual (Page 9)

PLASMA DISPLAY HANGER UNIT
8
H W
A A
N L
G L
E
R
U
N
I
T
INSTALLING WALL FRAME SET B AND CONNECTING FRAME
INSTALLING WALL FRAME SET B AND CONNECTING FRAME.
ATTACHING PAPER PATTERN PLAN ON THE WALL
.
Place frame set B on the left and right side of
the unit and use the enclosed screws (M5) to
secure them tightly.
.
Place the enclosed paper pattern
plan (actual size) on the wall with
glue or tape.
.
Drill holes on the wall as indicated
on the paper pattern plan with a
hand drill (power drill) and hammer
in the concrete anchors (8) firmly.
Connecting Frame
Frame set B
Hand drill
Paper pattern plan Paper pattern plan
1
2
.
Please be sure to not force an
adjustment when connecting frame
set B and connecting frame.
.
Otherwise, it will create problems
when connecting to frame set A.
Note