Digimerge D4202 User Manual
Page 26
Advertising
3. When you see the control bar, you have successfully logged into the program on the
Video Web Server. Click on “System Config” to set up.
SYSTEM CONFIG
5. Click on “System Config” again. In the Network setting, set the gateway the same as the
router’s gateway(192.168.1.1). Press “APPLY” to enable the change after the setting.
4. In the Peripheral setting, set baud rate, ID and the model that want to remotely control
later. Press “APPLY” to enable the change after the setting.
-23-
Advertising