Digimerge D4202 - Manual (Page 34)

You can modify the storing path for the
recording file and snapshot images .
1. Firmware Version : For the current
firmware version, you can click on the
“Find” button to get the latest firmware
from your PC. Press “Upgrade Firmware”
to upgrade it.
2.Turbo step: You can set the turbo step
when the turbo function is open.
Upgrade the firmware.
NOTE :
Do not reboot the Video Web Server while
it is upgrading the firmware.
1. Alarm : Enable or disable Alarm trigger
function.
2. Method : Two selections—Email or FTP.
3. Resolution : Image storing resolution for
Email or FTP function.
4. Alarm Duration : Alarm duration time.
5. Post Image : You can select how many
images you need to store when the alarm is
triggered.
6. Alarm record : Enable or disable “Alarm
trigger recording” function.
7. Alarm refresh : Clean the alarm
message “ ” which is shown on the
screen.
Set up the ALARM function. You can use it
to operate the “alarm trigger recording”
function.
FILE PATH FILE PATH
TOOLBOX TOOLBOX
ALARM ALARM
-31-