Digimerge D4202 - Manual (Page 29)

Step 1: Click twice to enter the Login setup (please refer to “software installation”)
Step 2: Key in “User Name” and “ Password”. (e.g. “User Name” and “Password” is
“dan”, and the IP address is 61.222.50.174). Click “OK” to establish the connection.
Follow the steps below to connect to a remote site. (e.g. If you set up the server at
your office with one static ADSL, you can remotely watch the video anywhere, with a
networkable computer.)
Step 3: If you see the video screen, then you have successfully connecti ng to the server.
NOTE:
1.There are two ways to get the software,
one is via the attached CD, the other
is via the Video Web Server. (Refer to
APPENDIX#3)
2.You can press the “Address Book”
button to add a new IP into this
table or choose any login IP
address to access the Video Server.
3.This function is designed to store
a list of IP addresses which you
can control and manage.
SOFTWARE OPERATION AT THE REMOTE SITE
-26-