Audio output controls, Audio meter – Sensoray 2224 Linux User Manual
Page 9
•
Audio In Gain Right: Sets non-AGC gain for right audio channel. The range for the
gain is from 0 – 118 in steps of 0.5dB. A setting of 0 would be no gain. A setting of
118 would be 118x0.5db = 59.0dB. This setting does not apply if AGC is turned on.
Audio Output Controls:
These settings are for audio output. The 2226S (with enclosure) only has the “HP Out”
output exposed. To change the audio output gain on the 2226S, use the audio HP out
settings
•
Audio Mono Out Additional Gain: 0-9dB gain for mono audio output channel.
•
Audio Mono Out Mute: If set, turns off the mono audio output.
•
Audio HP Out Additional Gain Right: 0-9dB gain for right high-power audio output
channel.
•
Audio HP Out Additional Gain Left: 0-9dB gain for left high-power audio output
channel.
•
Audio HP Out Mute Left: If set, turns off the left high-power audio output.
•
Audio HP Out Mute Right: If set, turns off the right high-power audio output.
•
Audio Stereo Out Additional Gain Right: 0-9dB gain for right stereo audio output
channel.
•
Audio Stereo Out Additional Gain Left: 0-9dB gain for left stereo audio output
channel.
•
Audio Stereo Out Mute Left: If set, turns off the left stereo audio output.
•
Audio Stereo Out Mute Right: If set, turns off the right stereo audio output.
Audio Meter:
The Audio Meter controls implement a VU meter.
•
Audio Meter Channel: Line In, Mpeg Out, SDI In.
•
Audio Meter Peak Left: peak level for left audio channel.
•
Audio Meter Peak Right: peak level for right audio channel.
•
Audio Meter Peak Left dB: dB peak level for left audio channel.
•
Audio Meter Peak Right dB: dB peak level for right audio channel. Displayed value
is dB level times 10 (To get actual value, divide this by 10).
•
Audio Meter Hold Release: Enable hold/release feature