Skutch Electronics BA-2 User Manual

Introduction, Installation, Operation

Advertising
background image

•

Introduction

Thank you for purchasing the BA-2 Promotion-On-Hold Adapter. This

unit can be used by itself, as a single station adapter, or it can be used on an
AS-702 non-compatible phone, to make it compatible. The BA-2 is simple to
use and is compatible with almost every make and model of telephone.

•

Installation

To install the unit on either a two line or single line telephone, follow

the four steps below:

•

Operation

•

To place a call on hold

Simply press the HOLD button on the BA-2, then hang up.

•

To release the hold condition

Pick up any phone that is connected to that line, and the adapter

will automatically reset.

•

Front Panel Lights

•

Steady On

Indicates that line is currently in use by the phone. The light does not

light when another phone is using the line.

•

Fast Flash

Indicates that the unit has detected that you have pressed the BA-2’s

HOLD button and is ready for you to hang up so that the BA-2 can hold the
call. You can reset the unit by pressing the HOLD button once again.

•

Slow Flash

Indicates that a call is ON HOLD.

•

Power Up

On initial power up, the light will alternately flash for 3 seconds.

•

Light Switch (back panel)

This switch is normally in position #3. Change the switch to a different

setting if other phone’s IN-USE lights do not light when the BA-2 is in the
hold condition.

•

Audio Input (back panel)

This input is connected to your audio source. Use the phones or

speaker output to drive this input. A pre-amp level output is not loud
enough.

•

Tech Support - 916-786-6186

If you have any problems getting the unit to work properly feel free to

give us a call. Technical Support is available between the hours of 7:30 AM
and 4:30 PM Pacific Time, Monday through Friday.

Plu g c o rd fro m p h o n e

in to p h o n e ja c k,

th e n to LIN E in p u t o n

BA -2 .

C o n n e c t su p p lie d

m o d u la r c o rd fro m

p h o n e to PH O N E

in p u t o n BA -2 .

C o n n e c t A u d io c a b le to

BA -2 , th e n to A u d io So u rc e .

C o n n e c t Po w e r A d a p te r fro m BA -2

to p o w e r o u tle t.

1

2

4

3

Advertising