Skutch Electronics CK-1A - Manual

Page 1 of 5
"Telecommunication Products to solve Telecommunication Problems"
CK-1A
Promotion-On-Hold Adapter
(For AT&T 2462)
Introduction
Thank you for purchasing the
Skutch CK-1A Promotion-On-
Hold Adapter for the AT&T
2462 two line cordless phone
system. The CK-1A is a true
plug and play device. The unit
does not require any "Learning"
to operate. When a call is placed
ON HOLD from the base set, or
any one of the cordless phones,
the caller will hear the
Promotion-On-Hold audio.
When the line is re-answered,
the audio automatically stops.
It's that simple!
Installation
1- Turn the phone upside down and connect the short modular cable from the CK-1A box
to the AT&T 2462 telephone jack that is labeled “LINE 1/ L1+L2”. (See Fig. 1).
Fig. 1
Sensor Board
Audio Cable
Short Modular Cable
For CD Players ONLY!
Sensor Cable
Power Cube