Skutch Electronics CK-1A - Manual (Page 2)

Page 2 of 5
2- Set the phone on the CK-1A box as shown in Figure #2.
3- Connect the audio cord from your audio source, to the AUDIO IN jack on the back of
the CK-1 box. For DIGITAL units use the cable that comes with the player, not ours.
To Telephone Lines To Audi o Sour ce
4- Connect a MOD cord from Telephone Wall Jack 1&2 to [1&2 Line on CK-1A], as
shown in Fig. #3.
Fig. 2
Fig. #3