SONOSAX STELLADAT II - Manual (Page 31)

31
> Setup Menu
> Display sub-menu:
> Meter selection sub-menu:
To select level meter mode:
• Peak meter
• Peak meter max
• VU-meter
> Counter # 1 and Counter # 2 sub-menus:
The two counters displayed on screen are configurable according to the needs
of the user and the options installed in the recorder. Counter #1 is the upper
counter and Counter #2 the lower one. The values assignable to the counters
are:
• Absolute time
• Program time (elapsed time since the last START ID)
• Index time (useful option for the manufacturer only)
• Timecode time
• Timecode us. bits (user bits)
• Delta TCext vs tape which indicates in Chase mode (Configuration Menu >
Chase Mode) the offset between Stelladat II and an external Time Code.
When Stelladat II is locked to an external Time Code, the offset value is
00:00:00:00.
> Rec date display sub-menu:
To display the date recorded on tape on the lower part of the screen, instead of
the power gauge.
> dB scale sub-menu:
To select the level meter dB scale. Each dB scale has a corresponding analog
output level and a 1 kHz tone generator level. To see these values, see the
Output Level Table, page 75.
> Limiter sub-menu:
Enables the limiter (LIMITER ON), or disables it (LIMITER OFF).