Sundance PARS User Manual
Page 29
Revision 11-wip-7
Page 29 of 70
Sundance Digital Signal Processing, Inc.
4790 Caughlin Parkway 233, Reno, NV 89519-0907, U.S.A.
email:
Tel: +1 (775) 827-3103
www.sundancedsp.com
Figure 28 – Link-layer interface selection
When the testbench is executed, the ‘DSPLink’ block will be invoked which interfaces to the PARS-
supplied link interface driver
’DSPLink.dll’. This driver is based on 3L/Diamond’s HOST
interface specification. You may use any hardware that is supported by Diamond
5
.
In this instance, in this example, we are communicating with an embedded system over a USB link
supported by the SMT6048
6
driver package.
Figure 29 - AddOne model running on hardware
The ‘AddOne’ model is now running hardware-in-the-loop.
5
Hardware vendors supporting 3L/Diamond supply link-layer drivers with their board support (BSP) packages.
6
See:
http://www.sundance.com/web/files/productpage.asp?STRFilter=SMT6048