Jmp2: sdb clock speed select and external trigger, Table 3: clock speed selection – Sundance SMT317 User Manual
Page 20
Advertising
Version 6.1
Page 20 of 24
SMT317 User Manual
16.2.
JMP2: SDB Clock speed select and external trigger
• SDB Clock speed select:
JP1
JP2
JP3
CLK (MHz)
IN
N/A
N/A
50
OUT
N/A
N/A
100
Table 3: Clock speed selection
• External trigger
JP2 is used to apply the external trigger signal.
The trigger signal is different depending of the mode selected:
• In burst mode, the trigger is an edge.
• In
continuous mode, the trigger is a level.
The user has to make sure he inputs the right external trigger signal according
to the mode selected.
Advertising