Hardware installation, Smt381, Smt338-vp – Sundance SMT8101 User Manual
Page 9
Version 1.3
Page 9 of 16
SMT8101 User Manual
Hardware installation.
Here are the basic steps to follow to install an SLB module with its mezzanine. As an
example, the SMT381-VP (the SMT391-VP follows the same procedure), which is the
combination of the SMT338-VP30-6 (SLB Base Module) and the SMT381
(Mezzanine Module). Please note that photographs don’t necessarily match exactly
with the SMT8101 systems but refer to similar products.
1 – Place the SMT395-VP on TIM site 1 of the carrier board (SMT310Q).
2 – The following are then required to mount SMT338-VP30-6+SMT381 on the
SMT310Q:
Top Primary TIM Connector
Bottom Primary TIM Connector
SHB
B
SHB
A
RSL
B
RSL
A
Po
w
e
r
SMT381
TIM 3.3V
SMT338-VP
a – First, fit two Nylon screws (M2x10), pointing out (the head of the screws on
bottom side).