Sundance SMT319 - Manual (Page 28)

Version 1.0.7 Page 28 of 45 SMT319 User Manual
FPGA design
FPGA has been design in VHDL, following Xilinx Modular Design rules.
Following modules are available:
• Decode: C6x interface.
• 2xSDB
• 4xSDL
• GB (not available in this release of SMT319)
• VideoIn
• VideoOut
Modular design allows you to replace some of these modules by your custom
modules without having to re-place and route the whole firmware of the board.
Available resources
The following table presents the VirtexII 2000 FF896 utilisation by Sundance
firmware:
Number of External IOBs 332 out of 624 53%
Number of RAMB16s 12 out of 56 21%
Number of SLICEs 3696 out of 10752 34%
Number of BUFGMUXs 3 out of 16 18%
Number of TBUFs 1420 out of 5376 26%
Table 8: overall available FPGA resources
Video input interface
Video output interface is composed of the following files: