Sundance SMT6060-TCPIP - Manual (Page 31)

Revision 0.4
Page 31 of 31
Sundance Digital Signal Processing Inc.
4790 Caughlin Parkway 233, Reno, NV 89519-0907, U.S.A.
Tel: +1 (775) 827-3103, Fax: +1 (775) 827-3664, email: [email protected]
www.sundancedsp.com
6.16. CONFIGURING THE SMT363
To enable the SMT363 to automatically run the net2dsp application when the module
is reset, use the SMT6001 flash programming utility from Sundance, and add the
net2dsp.app file.
Figure 24 - SMT6060-TCPIP Using the Flash Utility
Mark the entry as bootable to ensure that it is loaded automatically when the module is reset.
Figure 25 - SMT6060-TCPIP Marking the Bootable file