Teac AG-H380 - Manual (Page 29)

29
EN
G
LI
SH
Timer Recording
You are able to set the various external USB storage devices such as
USB flash memory to record programme at the desired time.
Connect the external USB storage device to the unit beforehand.
1 Select “Timer REC once” or “Timer REC daily” by pressing
the TIMER button on the remote control unit.
The timer indicator “ ” and “ ” light on the display.
2 Prepare for the timer recording.
Tune in a station, etc.
3 Press the STANDBY/ON button on the remote control unit
to place the unit in standby.
One minute before the set On time, the unit turns on and starts
recording at the On time.
When the Off time is reached the unit will return to standby.
< Do not turn off the unit by pressing the POWER button on the
main unit. The timer does not work when the On time is reached.
Timer off
When not using the timer, press the TIMER button on the
remote control unit to select “Timer off”.
The timer indicator “ ” disappears from the display.
Sleep Timer
The power can be switched off after a specified amount of time.
Press the SLEEP button repeatedly until desired time appears on the
display.
SLEEP-90 (80, 70 ... 10)
The power will be switched off 90 (80, 70 ... 10) minutes later.
SLEEP OFF
The sleep timer is off.
< The display is dimmed when you set the sleep timer.
< If you want to check the remaining time, press the SLEEP button
once. The remaining time will be displayed for 3 seconds, and
return to the normal display.