Teac HA-P90SD - Manual (Page 18)

18
SETTINGS
PLAY Playback settings
AREA Playback area
REPEAT Repeat mode
RANDOM Random playback ON/OFF
EQ Equalizer settings
PRESETS Equalizer (for SD playback only)
DISPLAY Display settings
BRIGHT Display brightness
DIM TIME Time until screen dims
DISP OFF Time until screen turns off
RESCAN SD card file scanning settings
AUTO Rescan automatically
o File data is automatically prepared
when an SD card is inserted.
MANUAL Rescan manually
o Select this to prepare file data when
AUTO is off.
OTHERS Other settings
RESET Setting reset
o Restores settings to their factory
defaults
MAX VOL Maximum volume
(output attenuation setting)
PWR SAVE Time until power turns off automatically
DGTL IO Digital input/output setting
PWR MODE Power mode HIGH/LOW setting*
USB CHRG USB recharging function ON/OFF
ABOUT Shows unit information
* The continuous operation time using batteries increases, but the nominal
output level is reduced.
Download the latest firmware
Please visit the HA-P90SD product page from the TEAC Global Site and down-
load the latest firmware.
(If no firmware is listed, no firmware update is available.)
http://teac-global.com/
For details, see “Using the TEAC Global Site” on page 12.
Troubleshooting
If you experience a problem with this unit, please check the following items
before requesting service. If it still does not operate correctly, contact the
retailer where you purchased the unit.
The unit does not turn on.
e If the remaining battery charge is too low, the unit will not turn on.
Supply power to the unit through the DC plug or the USB micro-B port
e Has the automatic power saving function put the unit to sleep? Turn
the volume knob counterclockwise to turn the unit off once.
No sound is output.
e Use the volume knob to adjust the volume.
e Confirm that the connected device is playing back.
e Confirm the PHONES jack connection.