Teac CD-H750 - Manual (Page 8)

8
Connections
A B C
L R
Stereo amplifier or
powered speakers, etc.
DIGITAL IN
(OPTICAL)
DIGITAL IN
(COAXIAL)
Digital audio
input device
RC
A audio cable RC
A c
oaxial digital cable Optical digital cable Included pow
er
co
rd
Wall socket
Audio input
(LINE IN, etc.)
CD-H750
CAUTION
< Turn off the power of all the
equipment before making
connections.
< Read the instructions of each
component you intend to use with
this unit.
A Analog audio output connectors
These RCA jacks output two channels of analog audio signals.
Connect these to an amplifier or other device with audio inputs.
Connect an audio cable's white pin plug to the white (L) jack and
connect its red pin plug to the red (R) jack.
White (L)
Red (R)
White (L)
Red (R)
< Be sure to insert each plug securely.
To prevent humming and interference, avoid bundling the signal
interconnection cables together with the AC power cord or
speaker cables.
B DIGITAL OUT audio output connectors
Digital 2-channel audio signal is output from this terminal.
When playing back files on a CD, iPod, iPhone or USB flash drive,
these output 44.1kHz/16-bit PCM signals.
Use a commercially-available optical digital cable or RCA coaxial
digital cable to connect this unit with other equipment.
C Power inlet (~IN)
Insert the included power cord here. After completing all other
connections, insert the power plug into a power outlet.
Unplug the cord from the outlet when not using the unit for a
long time.
Q Use only the included power cord. Use of a different cord
could cause fire or electric shock.