Teac CD-2000 - Manual (Page 11)

Basic Operation (1)
Power ON / OFF
Connect the power cord and signal cables to the unit.
Then, press the POWER button on the front panel to turn the unit on
(R). The power indicator on the front panel is on and the unit is in
normal operating mode now.
To turn the unit off, press the POWER button on the front panel.
The button is set to the off position (E), and the power indicator and
eventually the unit are off. Disconnect the AC power cord from the
main outlet when the appliance is not used for a long period of time.
Audio source selection
Press the POWER button on the unit to turn the unit on, and then
press the signal input selector button (INPUT) on the front panel or
the signal input selector button (k or j) on the remote control to
select an input signal. The display changes as follows:
SOURCE: CD 7 SOURCE: USB
SACD/CD switching
When a dual-layer SACD/CD disc is loaded and recognized by the
unit, press the SACD button on the front panel to switch between the
SACD or CD layer.
If the SACD layer is currently being played, the SACD indicator on
the front panel will light. If the CD layer is being played, the SACD
indicator will not light.
Open/close disc tray
Press the open/close button (-) on the front panel to open or close
the disc tray.
Play/pause
With the disc loaded properly or in stop mode, press the play/pause button
(7/9) on the front panel or remote control to play the current disc.
In play mode, press the play/pause button (7/9) on the unit or the
remote control to pause the current disc. Press the button again to
return to normal play mode.
Previous/next track
Press the previous track button (.) on the unit or remote control
twice to jump to the beginning of the previous track. Playback starts
automatically. If you press the previous track button (.) only once,
playback of the current track starts again from the beginning.
Press the next track button (/) on the unit or the remote control to
the jump to the next track and play.
Fast-backward/Fast-forward
In normal play mode, press the fast-backward button (m) on the
remote control for fast-backward. Release the button to return to
normal play mode.
In normal play mode, press the fast-forward button (,) on the
remote control for fast-forward. Release the button to return to
normal play mode.
Track selection with number buttons
To select tracks 1 to 9, press the number buttons 1-9 on the remote
control directly. To select track 10 or above, press the number buttons
1-9 on the remote control for the first (tenths place) digit of the track
number and then the number buttons 1-9 for the second (ones place)
digit within two seconds.
Repeat play
If you want to play the current track repeatedly, press the repeat play
button (p) button on the remote control once. The screen will
display “T” before the track number. If you want to play the entire disc
repeatedly, press the repeat play button (p) on the remote control
again. The screen will display “A” before the track number.
Random play
In stop or play mode, press the random play button (½) on the
remote control. The screen will display an “R” character, indicating that
it is in random play mode.
To cancel this function during random play mode, press the random
play button (½) or the stop button (8) once.
11
ENGLISH