Teac CD-2000 - Manual (Page 6)

Before Using the Unit (2)
DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speed. Do NOT lift or move
the unit during playback. Doing so may damage the disc or the laser
assembly.
WHEN MOVING THIS UNIT
When relocating or packing the unit for moving, be sure to remove
the disc. Moving this unit with the disc loaded may result in damage
to this unit.
CAUTION
The product should not be exposed to moisture and no object
filled with liquids, such as vases, should be placed on the product.
Do not install this equipment in a confined space such as a book
case or similar unit.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use
diluted neutral cleaning liquid. Be sure to remove any fluid completely.
Do not use thinner or alcohol as they may damage the surface of the
unit.
Discs
This unit can play the following discs:
CDs that bear the “COMPACT disc DIGITAL AUDIO” logo.
< 12cm (4.7”) or 8cm (3.15”) discs
< Linear PCM digital audio
Audio CDs are divided into tracks.
Super Audio CDs that bear the “Super Audio CD” logo.
< Single layer, dual layer or hybrid layer
< 12cm (4.7”) discs
< Digital audio (DSD)
Super Audio CDs are divided into tracks.
CD-R and CD-RW discs that have been correctly recorded
in the audio CD format (CD-DA) and finalized.
Note
< Depending on the quality of the disc and/or the condition of the
recording, some CD-R/CD-RW discs may not be playable.
< Copy-protected discs and other discs which do not conform to
the CD standard may not play back correctly in this unit. If you use
such discs in this unit, TEAC Corporation and its subsidiaries cannot
be responsible for any consequences or guarantee the quality of
reproduction. If you have problems with such non-standard discs,
you should contact the producers of the disc.
< Always place the disc on the disc tray with the label side up.
< To remove a disc from its storage case, press down on the center of
the case and lift the disc out, holding it carefully by the edges.
6