Rear panel, Figure 4. rear panel of the dvd duplicator unit – Teac DVW-D13A User Manual
Page 13
Rear Panel
TEAC Tower DVD Duplicator User’s Manual
5
Rear Panel
Figure 4 illustrates the rear panel of the DVD Duplicator unit.
Figure 4. Rear Panel of the DVD Duplicator Unit
cooling fan:
Ball-bearing fans cool the DVD Duplicator.
AC voltage selector:
Use this switch to select either 115VAC or 220VAC.
AC IN power connector:
Connect the included AC power cable to this input
connector. Plug the other end of the power cable into a three-prong receptacle
AC power outlet.
Caution:
Before you turn on the power to the DVD Duplicator, make sure
the correct voltage is selected. Otherwise, you risk damage to the unit. The
default setting is 115VAC.
Caution:
Do not attempt to bypass the grounding plug. Otherwise, you risk
electrical shock or damage to the unit.
Note:
To ensure proper operation, use only the original AC power cable with
your TEAC Tower DVD Duplicator unit.
AC IN power connector
cooling fans
AC voltage
selector
TEACdvwd17h.book Page 5 Sunday, May 1, 2005 6:28 PM