Teac CD-RW900MKII - Manual (Page 23)

TASCAM CD-RW900MKII
23
4 − Playback operations
Directory playback setting
1. Press the DIRECTORY key on the remote control.
Or, use the DIRECTORY option in the PLAY sub-
menu to turn this mode on or off (see “Operation
basics” on page 16).
Pressing the MENU key or pushing the MULTI JOG
dial exits to normal mode.
NOTE
All MP3 files in a disc can be played back when direc-
tory playback mode is off. The indicator MP3 lights up
and only the total number of track will be shown.
2. When stopped, use the MULTI JOG dial or SKIP key
to select desired directory for playback.
3. Press the PLAY key to start playback in the directory.
Program or Repeat playback can be operated in the
selected directory also.
NOTE
MP3 file formatted at 44,1 kHz sampling rate and 128
kbps or higher are required, otherwise, that MP3 file
cannot be played back.
Total number of tracks
You can choose whether the unit continues playback or stop when
MP3 playback fails (
Decode Err!
).
Select “MP3 ACTION?” sub-menu on the PLAY option. Select
“Skip” or “Stop.”
Skip
When MP3 playback fails, the unit skips the current track and
advances to the next track. Playback will stop if the current track
is the last track (i.e., if the repeat function is off and the current
track is the last track on the disc or in the program). The display
shows Decode Err! .
Stop
When MP3 playback fails, the unit stops playback. The display
shows Decode Err! .
MP3 action setting
During playback, titles are displayed in the following order of
priority:
ID3v2 > ID3v1 > file title
When stopped, the file title is displayed.
About MP3 track data