Teac MMR-8 v4.5 User Manual
Page 5
TASCAM MMR-8/MMP-16 Version 4.5 Owner’s Manual Update
4
New error message: "Can't verify TapeMode to non-
destr"
If a Tape Mode project is backed up from a HFS disk to a .BU format DVD or tape, it must be
restored onto an HFS disk to retain its Tape Mode status. During such copies, a verify request will
be ignored.
Fix for fade times of MMR-8/MMP-16 projects taken to
Pro Tools
In previous versions, the MMR-8/MMP-16 contained a bug regarding the fade times of its events.
If an MMR-8/MMP-16 project was taken to Pro Tools, the fade up and down times were half the
duration in Pro Tools. This has now been corrected.
User Note:
When mounting an MMR-8/MMP-16 project removable hard drive to a Pro Tools station, reboot
the computer after inserting the hard drive. Failure to do so could cause erroneous behavior with
the project.