Teac US-125M - Manual (Page 13)

TASCAM US-125M
13
7 To adjust the output level, use the OUTPUT knob on the front of this interface,
as well as the Levels tab of the computer Speakers Properties control panel.
This adjusts the output levels of both the LINE OUT and PHONES jacks.
Open the Playback tab of the Sound Control Panel, and then click Properties at the
bottom right of the window.
Click the Levels tab of the Speakers Properties window.
Set the level for Speakers to the maximum. Then, click OK at the bottom of the
windows to close them.
Windows XP
1 Quit all applications, and open the Control Panel from the start menu.
2 Open the Sounds and Audio Devices panel.
NOTE
If you do not see the above panel, click Sounds, Speech, and Audio Devices and then
select the Sounds and Audio Devices panel.
3 Click the Audio tab, and set the Default device under both Sound playback and
Sound recording to USB Audio CODEC.
4 To adjust the input levels, use the input knobs (MIC, INST, LINE and COMPUTER)
on the front of the interface. Adjust them so that the OL (overload) indicator
does not light.
When the LIMITER button is ON, it can prevent distortion from sudden loud mic
input signals.
Overload indicator
4 – Settings