Teac US-122L - Manual (Page 21)

TASCAM US-122L
1
7 – Troubleshooting
Q. I performed a mixdown, but
the automation and effects
were not reflected in the mixdown.
A.
In the Export Audio Mixdown dialog
box, make sure that automation and effects
are enabled.
Q. I made a CD using the WAV
file I mixed-down, but the
speed is obviously different.
A.
Could your project be set to 48 kHz?
If your ultimate objective is to create a CD,
we recommend that you work in 44.1 kHz
from the beginning.
To specify the sample rate, pull down the
Project
menu, choose Project Settings, and
set the sample rate to 44,100 Hz.
Q. Using the ReWire protocol,
can I record the incoming audio
on a track?
A.
In Cubase LE, ReWire tracks do not
have recording capability.
You will have to export the audio data, and
then import it into an audio track.
Q. I have connected an audio
source to the US-122L, but can-
not hear anything.
A.
Make sure that the input level is raised
appropriately. If the input is analog, the
green indicator will light when a signal is
being input.
Make sure that the monitor (or headphone)
level is raised, and that the connections are
correct.
Q. The sound is distorted.
A.
Make sure that the signal is not over-
loading. The ideal level is when the red
indicator lights occasionally.