Teac US-122L - Manual (Page 7)

TASCAM US-122L

Top panel
2 – Parts of the US-122L
1 PHONES/LINE OUT level knob
Controls the output level of the LINE OUT
jacks and the PHONES jack.
2 MIDI IN indicator Lights when MIDI
data is being received at the MIDI IN con-
nector.
MIDI OUT indicator Lights when MIDI
data is being transmitted from the MIDI
OUT connector.
3 USB indicator Lights to indicate a
valid USB connection to the host comput-
er.
4 MON MIX balance knob Controls
the balance of the signal sources being out-
put from the LINE OUT jacks and the
PHONES jack. When this knob is turned to
the far left, the signal being input to the
US-122L (from the XLR jacks, or 1/4"
phone jacks) will be output. When this
knob is turned to the far right, the output
signal received from the computer via USB
will be output.
5 MONO switch Turn this switch ON if
you want to monitor in monaural. This
switch affects only the analog input signal.
6 INPUT knobs (L, R) Adjust the level
of the audio signal being input to the MIC
IN jacks and LINE IN jacks.