Teac DR-22WL - Manual (Page 12)

12
TASCAM DR-22WL
Connecting the unit to a
smartphone via Wi-Fi
CAUTION
This product has been designed to be compliant with
rules and regulations in the sales area, display as
needed has been. This product is used in the country /
region of the following has been approved.
United States, Canada, Europe (EU Member States),
Australia, New Zealand, Japan
In countries other than the above, you might have to
use the WiFi function is limited. Before using, please
check the laws and regulations of the country.
You can operate this unit by remote control with a free
dedicated application (DR CONTROL). In addition to transport
control operations such as playback and stop, you can also
adjust the input, transfer recorded files and more via Wi-Fi.
How to obtain and install the dedicated
application (DR CONTROL)
1. Connect your smartphone to the Internet.
2. If your smartphone is an Android device, download and
install the dedicated application (DR CONTROL) from
Google Play. If it is an iOS device, download and install
from the App Store.
Connecting the unit to a smartphone
via Wi-Fi for the first time
You can connect the unit to a smartphone directly via Wi-Fi.
Therefore, you do not need external devices, such as a router,
or a Wi-Fi network environment. For the connection, you only
need the unit and your smartphone.
When connecting the unit to your smartphone by Wi-Fi, you
cannot connect the smartphone to an external Wi-Fi network.
8 If using an iOS device
1. Press the Wi-Fi button of the unit to make the Wi-Fi
indicator blink.
A pop-up message appears on the display.
2. You will be making a connection to a new smartphone,
so press the F3 button.
3. “SSID” and “Encryption key” appear on the display, and
then the unit enters the WPS mode automatically.
NOTE
The WPS mode is the standard for easy connection
between Wi-Fi devices. The unit employs push buttons
for Android devices.
4. On your iOS device, select “Settings” w “Wi-Fi”.
5. When you turn on Wi-Fi on your iOS devices, a Wi-Fi
device SSID list appears. Select the SSID shown on the
display of the unit.
6. A password input screen appears on the iOS device. Enter
the encryption key shown on the display of the unit.
7. A Wi-Fi connection between the unit and your smart-
phone is established and the Wi-Fi indicator is lit.