Teac US-16X08 Reference Manual - Manual (Page 11)

TASCAM US-16x08
11
5 – Connections
Examples of connections with other equipment
Drums Guitar
Bass Guitar
Headphones
Vocal mics
Keyboard
Sound module
USB
Computer
Powered speakers or
amplifier and speakers
Drum machine
CAUTION
• Before making connections, turn this unit and all equipment to be connected off (standby).
• The phantom power switches change the settings for groups of 4 channels. Do not set phantom power to +48V when an unbalanced
dynamic mic is connected.
• Do not connect or disconnect mics while phantom power is set to +48V. Doing so could cause a loud noise and might damage this
unit and connected equipment.
• Set the LINE OUT and PHONES knobs to their minimum values before switching the phantom power setting between +48V and OFF.
Sudden loud noises from monitoring equipment could occur, and this could damage the equipment or harm hearing.
• Supplying phantom power to some ribbon mics will break them. If you are unsure, do not supply phantom power to a ribbon mic.