Teac US-16X08 Reference Manual - Manual (Page 26)

26
TASCAM US-16x08
10 – Troubleshooting
Troubleshooting
Please read this chapter if you are unable to use the unit
properly even after setting it up following the procedures in this
manual.
If you are still unable to resolve a problem, please contact a
TASCAM customer center (see back of document) with the
following information about the operating environment and
details about the trouble.
Operating environment
• Computer manufacturer:
• Model:
• CPU:
• Memory (RAM):
• Operating system:
• Applications used:
• Antivirus software:
• Wireless LAN use:
See the end of this document for contact information.
8 Installation fails.
8 Installation completes, but the computer does not
recognize the unit.
If some trouble is causing installation to fail, or if the computer
does not recognize the unit even though installation completes,
check the following.
1. Change the USB port
Since the unit might not properly function with some
USB ports, try connecting to a different USB port that is
built into the computer, and reinstall the driver.
NOTE
• Try again after disconnecting other USB devices. (Keyboards
and mice can be left connected.)
• Do not use a USB hub. Always connect the unit directly to a
USB port on the computer (built-in).
2. Stop software that is running in the background
Since antivirus software and other software running in
the background can interfere with installation, stop them
before beginning installation. See “Installing the driver
and Settings Panel” on page 6 in this manual for how
to install and uninstall the driver and Settings Panel.
8
There is no sound even when audio is playing back.
The audio output must be set on the computer.
Please confirm the following while the unit is connected to the
computer. Moreover, if you make the following settings, sound
will be output through this unit, but no sound will be output by
the computer’s speakers or headphone jack.
Windows 8/Windows 7
i See the “Windows 8” or “Windows 7” instructions in the
“Windows Media Player” section of the “Application guide”
chapter of the Reference Manual, and make settings as
necessary for the OS.
i Conduct procedures 1-4 for Windows 8 or procedures 1-3 for
Windows 7 to set the default device for playback.
Mac OS X
Quit all applications and open “System Preferences…” from
the Apple menu.
Open “Sound”, and select “US-16x08” on the Output tab.
After completing the setting, restart the computer and
check the sound of playback.
Depending on the application that you are using, you might
need to make additional device settings.
In particular, DAW applications operate using audio engines
with settings that are different from the OS settings, so first
confirm the DAW settings after installing the driver and
Settings Panel for this unit.
Please see the manuals for the applications that you are
using for detailed setting procedures.
8 Sound breaks up or there is noise.
The processing load on the computer causes sound to break up
and noise to occur.
Here are some methods to reduce the load on the computer.
1. A wireless LAN and software running in the background,
including antivirus software, regularly put processing
loads on the computer, which can cause sound to break up
and other noise. Stop wireless LAN transmission, antivirus
software and other software running in the background
when using this unit.
2. Set the buffer size (latency) in the audio application that you
are using or in this unit's Settings Panel to a larger value.
(Windows only)
NOTE
Consult the maker of the audio application that you are
using for methods to reduce its load on your computer.
3. Change the settings of your computer so that they are
optimal for audio processing.
Windows 8
1 In Windows 8, right-click the ordinary Start screen
(Metro user interface screen) and then click “All apps”.
2 Right-click “Computer” and select “Properties”.
3 Click “Advanced system settings”.
4 Click “Settings” in the “Performance” section of the
“Advanced” tab of the “System Properties” window.
5 In the “Visual Effects” tab of the “Performance Options”
window, select “Adjust for best performance”.
Windows 7
a) Turn Aero off.
1 Right-click the desktop and select “Personalize”.
2 Select a “Basic” or “High Contrast” theme.
b) Performance settings
1 Right-click “Computer” and select “Properties”.
2 Click “Advanced system settings”.
3 Click “Settings” in the “Performance” section of the
“Advanced” tab of the “System Properties” window.
4 In the “Visual Effects” tab of the “Performance Options”
window, select “Adjust for best performance”.
Mac OS X
1 Open “System Preferences…” from the Apple menu,
and select “Energy Saver”.
2 Set “Computer sleep” to “Never”.
3 Set “Display sleep” to “Never”.
NOTE
Depending on the Mac OS X version and Mac computer
model, this setting might not be available.
4. Change the USB port
Since the unit might not properly function with some
USB ports, try connecting to a different USB port that is
built into the computer.