Teac 788 EPROM Update Files v1.10 Installation - Manual (Page 3)

TASCAM
TEAC Professional Division
7733 Telegraph Road
Montebello, CA 90640
Phone (323) 726-0303
Fax (323) 727-7632 INSTALLATION INFORMATION
. . . . . . . . . . . . . . . . . . . . . . . . . .
5. Locate and remove U5 from the MAIN PCB. Install the new version EPROM. (See Ex.3)
6. Reassemble the unit using the 16 screws removed during Step 3.
The EPROM can be removed by sliding the black plastic locking device in the
direction of the arrow etched onto the ring. The holder then lifts from the PCB
allowing removal of the EPROM. Reverse the procedure to install the new
EPROM.
Detach Attach
MAIN PCB
U5
Ex. 3