Teac 2488 Reference Manual - Manual (Page 6)

1 – MIDI Control/Program Change messages
6
TASCAM 2488 Reference Manual
Single effect
Use MIDI channel 10 to control this processor. The
single processor can use any one of a number of effect types: reverb, delay, chorus, pitch shifter,
flanger, phaser and gated reverb.
Expander (EXP)
00 00 Threshold 0 – 32 = 0 – –32dB
00 01 Ratio 0 – 14 = 1:1.0, 1:1.1, 1:1.3, 1:1.5, 1:1.7, 1:2.0, 1:2.5, 1:3.0,
1:3.5, 1:4.0, 1:5.0, 1:6.0, 1:8.0, 1:16, 1:32,
00 02 Attack 1 – 100 = 1 – 100(msec)
00 03 Release 1 – 100 = 1 – 100(msec)
00 04 (reserved)
00 05 Switch 0, 1 = Off, On
Effect NRPN Parameter Values
Effect NRPN Parameter Values
Reverb (REV)
00 00 Room Type 0 – 3 = Hall, Room, Live, Studio
00 01 Pre Delay 0 – 250 = 0 – 250(msec)
00 02 Rev Time 1 – 100 = 0.1 – 10.0(sec)
00 03 Diffusion 0 – 100 = 0 – 100
00 04 Out Level 0 – 127 = 0 – 127
Delay (DLY)
00 00 Type 0 – 2 = Stereo, Ping-Pong, Multi-Tap
00 01 Pre Delay 0 – 1000 = 0 – 1000(msec)
00 02 FB Delay 0 – 1000 = 0 – 1000(msec)
00 03 Feedback 0 – 100 = 0 – 100
00 04 Out Level 0 – 127 = 0 – 127
Chorus (CHO)
00 00 Rate 1 – 100 = 0.1 – 10.0(Hz)
00 01 Depth 0 – 100 = 0 – 100
00 02 FB Delay 0 – 100 = 0 – 100(msec)
00 03 Feedback 0 – 100 = 0 – 100
00 04 Out Level 0 – 127 = 0 – 127
Pitch Shifter (PIT)
00 00 Pitch 0 – 12 – 24 = –12 – 0 – +12
00 01 Fine 0 – 50 – 100 = –50 – 0 – +50
00 02 FB Delay 0 – 500 = 0 – 500(msec)
00 03 Feedback 0 – 100 = 0 – 100
00 04 Out Level 0 – 127 = 0 – 127
Flanger (FLG)
00 00 Rate 1 – 100 = 0.1 – 10.0(Hz)
00 01 Depth 0 – 100 = 0 – 100
00 02 FB Delay 0 – 1000 = 0 – 1000(msec)
00 03 Feedback 0 – 100 = 0 – 100
00 04 Out Level 0 – 127 = 0 – 127