Teac CD-GT1 - Manual (Page 8)

8
— TASCAM CD-GT1
88
English
English
Adjusting the balance
Inputs Inputs
 e  has three input sources  e  has three input sources
 the  being played
 the guitar or microphone connect
ed to the GUITAR/MIC IN jack
 any stereo input connected to the
LINE IN jack
 e fi rst and last of these cannot have
their input levels changed by the 
 but see below for details of how
to balance the  with the input
 se the level control of the device
connected to LINE IN to adjust the
level of this source remember that
this source cannot be eff ected by
the s eff ects
 se the s INPUT control
to adjust the level of the guitar or
mic before it is sent to the eff ect
 hen a menu is not selected you
can use the 5 and b keys to set
the relative balance of the guitar
or microphone but not the LINE
IN source compared to the output
from the  player  is MIX value
can be set to between –5 and +5 
emember that this is only pos
sible when not in menu mode
 se the s menu system
to adjust the output level of the
eff ect
Outputs
 ere are two outputs the line and the
headphones  ese cannot have their
levels set seperately—use the OUTPUT
control to set the overall output level
Use the INPUT control to
adjust the GUITAR/MIC IN
level
You can't adjust the
input level of LINE IN
with the CD-GT1
Use the CD-GT1's menu
system to set the output
level of the internal effect
Use the OUTPUT
control to adjust
the overall level
to the LINE OUT
and headphones
The MIX feature (5 and b
keys outside menu mode)
adjusts the balance betwen
input and CD