DCS WOU-130 - Manual (Page 38)

36
US CA
User preference settings
How to change the language
Your oven is preset to use DCS’s CONV (for ‘convection’) terminology. This is listed in the
languages as LANG DCS. However, you may choose to use an alternative, AERO terminology.
This is listed in the other languages as LANG USA. To select it, refer to the instructions on how to
change the language below. Note that once you have changed terminologies, all references to
CONV in the user guide should be understood as being equivalent to AERO.
1
Enter the USER SELECT mode and turn the oven mode knob clockwise until LANG DCS appears
in its display.
2
Press P U S H TO
C L E A R
to toggle through the different languages: LANG DCS for CONV terminology,
LANG USA for AERO terminology, LANG UK ENG for UK English, LANGUE FRANCE for Canadian
French or LANG ESPANO for American Spanish.
3
Press the CLOCK button to activate.
4
Turn the oven mode knob back to OFF.
How to reset the oven
This will reset the TEMP (temperature) SCALE, SHORT ALERT, TIME MODE and SHOW CLOCK to
their default settings. SABBATH mode and language settings will remain unaffected.
1
Enter the USER SELECT mode and turn the oven mode knob clockwise until RESET appears in its
display.
2
Press
P U S H TO
C L E A R
to reset the oven to default settings.
3
Press the CLOCK button to exit USER SELECT mode.
4
Turn the oven mode knob back to OFF.
How to lock the control panel
Locking the control panel disables all the buttons and knobs, which can be useful when cleaning
oven surfaces or preventing accidental bumps and unauthorized use. The control panel can only
be locked when the oven mode and temperature are both OFF.
To lock the control panel
Press the
P U S H TO
C L E A R
button and hold down for five seconds. The LOCK symbol will appear in
the clock display. Repeat to unlock.