Teletronics EZStation2 - Manual (Page 23)

Item Description
Static IP Click to select Static IP support on WAN
interface. There are IP address, subnet mask and
default gateway settings need to be done.
IP Address If you select the Static IP support on WAN
interface, fill in the IP address for it.
Subnet Mask If you select the Static IP support on WAN
interface, fill in the subnet mask for it.
Default Gateway If you select the Static IP support on WAN
interface, fill in the default gateway for WAN
interface out going data packets.
MTU Size Fill in the mtu size of MTU Size. The default
value is 1400
DNS 1 Fill in the IP address of Domain Name Server 1.
DNS 2 Fill in the IP address of Domain Name Server 2.
DNS 3 Fill in the IP address of Domain Name Server 3.
Clone MAC Address Fill in the MAC address that is the MAC address
to be cloned.
Enable uPNP Click the checkbox to enable uPNP function.
Enable Web Server
Access on WAN Click the checkbox to enable web configuration
from WAN side.
Enable WAN Echo
Reply Click the checkbox to enable WAN ICMP
response.
Enable IPsec pass
through on VPN
connection Click the checkbox to enable IPSec packet pass
through
Enable PPTP pass
through on VPN
connection Click the checkbox to enable PPTP packet pass
through
Enable L2TP pass
through on VPN
connection Click the checkbox to enable L2TP packet pass
through
Set TTL value Click to Enable and set Time to Live value.
Apply Changes Click the Apply Changes button to complete the
new configuration setting.
Reset Click the Reset button to abort change and
recover the previous configuration setting.