Q-See QSD42908 - Manual (Page 31)

QSD42908 User’s Manual
31
Fig 4.12 Playback list
Step 3: Select backup device
Please confirm the backup device: USB flash memory, USB HDD, USB
DVD/CD-RW, and select the corresponding backup device.
Step 4: Start and finish backup
Move “Active Frame” to “Save” button and press
【ENTER】key to start backup.
When backup starts, corresponding message box will pop-up to indicate the
result.
Backup video segment
You also can backup the image segments when the image is being played back.
The steps are:
1) Enter into the playback interface, playback by file or playback by time;
2) Press
【EDIT】key to start selecting the current playback image, and press
【EDIT】again to stop selecting. This segment is selected;
3) You can repeat step 2 to select many segments. 30 segments can be selected
in all.
4) After you select all segments, press
【ESC】key, a message window will
pop-up. If you press the “Confirm” button, the DVR will start to backup the
selected segments. If you press the “Cancel” button, DVR will abort backup.