Thinklogical Peripheral Extender Manual - Manual (Page 12)

Extend Distribute Innovate
REVISION A 10 JUNE 2011
5.2.3.2 Standards with Which Our Products Comply
Safety

CENELEC EN 60950-1, 1 st Edition (2001)
Electromagnetic Emissions

EN55022: 1994 (IEC/CSPIR22:1993)

EN61000-3-2/A14:2000

EN61000-3-3:1994
Electromagnetic Immunity

EN55024:1998 Information Technology Equipment-Immunity Characteristics

EN61000-4-2:1995 Electro-Static Discharge Test

EN61000-4-3:1996 Radiated Immunity Field Test

EN61000-4-4:1995 Electrical Fast Transient Test

EN61000-4-5:1995 Power Supply Surge Test

EN61000-4-6:1996 Conducted Immunity Test

EN61000-4-8:1993 Magnetic Field Test

EN61000-4-11:1994 Voltage Dips & Interrupts Test
5.2.4 Supplementary Information
The following statements may be appropriate for certain geographical regions and might not apply to
your location.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user may be required to correct the interference to radio
communications.
NOTE: This Class A digital apparatus complies with Canadian ICES-003 and has been verified as
being compliant within the Class A limits of the FCC Radio Frequency Device Rules (FCC Title
47, Part 15, Subpart B Class A), measured to CISPR 22: 1993 limits and methods of
measurement of Radio Disturbance Characteristics of Information Technology Equipment.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numerique de la classe A respecte toutes les exigencies du Reglement sur le material
brouilleur du Canada.