Thinklogical Velocitykvm T-4200 DVI Modules 4, 5, 8, 24 Manual - Manual (Page 13)

T-Series DVI Modules, Rev. C
13 October, 2012
3. REGULATORY & SAFETY COMPLIANCE
3.1 Safety Requirements
3.1.1 Symbols found on the product
Markings and labels on the product follow industry-standard conventions. Regulatory markings found on
the products comply with domestic and many international requirements.
All T-4200 DVI Modules are designed and identified as Class 1 LASER products .
3.1.2 Regulatory Compliance
Thinklogical VelocityKVM Extender products are designed and made in the U.S.A. VelocityKVM
Extender products have been tested by a certified testing laboratory and found to be fully compliant with
the following standards (both domestic USA and many international locations):
North America
Safety
ANSI/UL60950-1: 1
st
Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
LASER Safety
CDRH 21CFR 1040.10
Class 1 LASER Product
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
European Union
Declaration of Conformity
Manufacturer’s Name & Address:
Thinklogical, LLC
®
100 Washington Street
Milford, Connecticut 06460 USA
Telephone: 1-203-647-8700
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the EMC
Directive 89/336/EEC.
3.1.3 Standards with Which Our Products Comply