Thinklogical Configuring the TLX ASCII Interface - Manual (Page 14)

®
Configuring the TLX ASCII Interface 11 Rev. A - July, 2015
Regulatory & Safety Compliance
Symbols found on the product
Markings and labels on Thinklogical products follow industry-standard conventions. Regulatory
markings found on the products comply with domestic and many international requirements.
Regulatory Compliance
Thinklogical’s products are designed and made in the U.S.A. These products have been tested
by a certified testing laboratory and found to be compliant with the following standards (both
domestic USA and many international locations):
North America
Safety
ANSI/UL60950-1: 1 st Edition (2003)
CAN/CSA C22.2 No. 60950-1-03
CENELEC EN 60950-1, 1 st Edition (2001)
LASER Safety
CDRH 21CFR 1040.10
Class 1 LASER Product
IEC60825:2001 Parts 1 and 2
Class 1 LASER Product
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference,
in which case the user may be required to take adequate measures.
European Union
Declaration of Conformity
Manufacturer’s Name & Address: Thinklogical, LLC
®
100 Washington Street
Milford, Connecticut 06460 USA
These products comply with the requirements of the Low Voltage Directive 72/23/EEC and the
EMC Directive 89/336/EEC.
Standards with Which Our Products Comply
Safety
CENELEC IEC 60950-1 2 nd Ed. 2005
Electromagnetic Emissions
EN55022: 1994 (IEC/CSPIR22: 1993)
EN61000-3-2/A14: 2000
EN61000-3-3: 1994
Electromagnetic Immunity
EN55024: 1998 Information Technology Equipment-Immunity Characteristics