Tri Tool 201BA Beveler - Manual (Page 12)

12
TRI TOOL INC.
92-0631 : Orig. 960119
OPERATION
Read the operating instructions carefully before attempting to operate the Model
201BA BEVELMASTER
TM .
Use eye protection at all times when operating the Model 201BA.
Adjusting the Adjustable Saddle Kit to the required pipe or tube size.
Loosen the Hex Head Screw on the front of the Model 201BA.
Turn the Adjustment Feed Screw to raise or lower the Adjustable Saddle.
Select the line on the side of the Adjustable Saddle and adjust the height so that the
desired line is even with the seat of the Main Housing.
One side of the Saddle is marked with pipe sizes and the other is marked with tube
sizes.
Tighten the Hex Head Screw on the front of the Model 201BA once the desired
location has been selected.
Operation of the Adjustable Saddle