Operation – Tri Tool 206B ID Tracking Module User Manual
Page 10
Advertising
10
TRI TOOL INC.
92-0461 : Rev. 941005
NOTE:
OPERATION
Read the Operating Instructions carefully before attempting to operate the Model
206B-IDTM.
Refer to the Operator’s Manual for Operating Instructions for the Model 206B
BEVELMASTER
TM
.
Remove the (3) three Tool Holders from the Model 206B.
Mount the Model 206B-IDTM to the 206B Headstock using the (8) eight Cap Screws
that have been provided.
Model 206B with an ID Tracking Module Mounted Inside a Pipe
Install the Mandrel Assy into the pipe.
Use the Extended Mandrel provided with the Model 206B-IDTM Kit with the
Standard Jaw Blocks, Ramps and Adapters.
Advertising
This manual is related to the following products: