Tri Tool 224B ID Tracking Module - Manual (Page 8)

8
TRI TOOL INC.
92-0834 : Orig. 0990603
CAUTION:
MAINTENANCE
IN GENERAL
All components should be cleaned and coated with a light film of oil prior to use.
If the Model 224B- IDTM is operated in such a manner that the tool block collects debris
while cutting, the tool holder, lock block and the feed screws should be cleaned after
each cutting operation.
Use a clean, non-detergent oil, preferably SAE 10 (SSU or lighter).
Tool life may be severely shortened, unless chips and/or other debris that have
been deposited on the cutting head during the machining operation are
removed.
Clean Up