Tri Tool 224B ID Tracking Module - Manual (Page 9)

9
Model 224B ID Tracking Module
92-0834 : Orig. 990603
RECOMMENDED MAINTENANCE SCHEDULE
Daily maintenance when the unit is in operation:
Wipe the unit down and spray with rust preventative under sever humidity
conditions.
Visually inspect for loose screws, missing screws, damaged, etc.
After every 20 hours of actual operation:
Clean and lubricate the slide rails.
Disassemble the unit and wipe the slide rails.
Excess lubricant will collect grit and/or chips and tend to cause jamming and/or
damage to the slide rails.
If the ID Tracking Module is to be stored or if it will remain out of service for a significant
period of time (30 days or more), it should be thoroughly cleaned, lubricated and
sprayed with a rust preventative prior to storage.