Tri Tool 304 Tube Squaring - Manual (Page 10)

10
TRI TOOL INC.
92-0749 : Rev. 110328
Cutting Head Speeds
75 RPM Max.
Functional Speed Range
0 to 70 RPM
Feeds
Manual feed handle is mounted at rear of tool, providing .560" (14.2mm) of
axial feed.
Mounting
Manual saddle clamping system.
Drive System
Variable Speed Electric Drive Motor.
Variable Speed Pneumatic Drive Motor.
Power Requirements
Electric Drive Motor
115 VAC ±10%, 50/60 Hz, 9.6 Amp.
220 VAC ±10%, 50/60 Hz, 2.5 Amp.
Pneumatic Drive Motor
55 cfm at 90 psi (26 lt/sec at 621 kPa)