Tri Tool 576AC Sever Machine - Manual (Page 14)

14
TRI TOOL INC.
92-0676 : Rev. 070222
Stainless steel, which work hardens, must be worked with a heavy enough feed to
stay under the work hardened surface.
Feed at rate of at least .003” (.08 mm) to .005” (.13 mm) per revolution.
Never allow the bit to burnish the surface.
Reducing cutting feed and speed will normally minimize any chatter problems.
MATERIAL CUTTING CAPABILITIES
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and aluminum
without limitations other than size and wall thickness as specified.
Inconel and some other high-temperature alloys may require special procedures as
a function of wall thickness. Contact TRI TOOL INC’s Engineering Department for
details.